Beneficial for electroless nickel applications: D16 SS
Stainless steel vertical pumps complement the Hendor product catalogue since 1997. Throughout the years, designs improved progressively based on market demands and innovative production techniques. This blog highlights the benefits of the SS D16 pump range.
View the D16 vertical pump range.
Latest stainless steel fabrication technology
The D16 Stainless Steel 316L vertical pump stems from the latest fabrication technologies. This results in the most efficient and reliable stainless steel centrifugal pump available in the market. Through the cantilever design, the D16 range is sealless, dry-run safe, and hence maintenance free.
The D16 range is available in three versions; a.) bottom discharge, b.) above tank discharge including discharge pipe, and .c) for Out-of-Tank installation. All are suitable for electroless nickel applications, highly alkaline cleaners, and other high-temperature applications.
Areas of application
While the standard construction materials for Hendor pumps (PP and PVDF) excel in corrosion resistance, stainless steel D16-range mainly fills the gap for applications involving (corrosive) solutions at elevated temperature (>100°C). Examples are industrial cleaner tanks, or black oxide processes for steel.
A specific area of use for our D16 pumps is in electroless or autocatalytic nickel plating solutions. Standard stainless steel pumps for electroless nickel only offer anodic protection on the outer surface of the pump. Hendor’s D16 also provides anodic protection at the most critical area of the pump: the impeller, and the interior of the volute. Hendor offers an unique optional cathode inside the volute to overcome the shielding effects of the faraday cage inside the volute. In line with the unique internal anodic protection of D16 pumps, stainless steel filter chambers with internal anodic protection to go with the D16-pumps are also available.
Benefits of Hendor D16 vertical pump
With the new smart hydraulic design much higher flow rates are reached, e.g. the maximum flow rate of the D16-67-400-SS with a 5,5 kW is an impressive 67 m3/h. To demonstrate the range - the smallest model, D16-05-260-SS with a 0,25 kW already provides a maximum flow rate of 5 m3/h.
Other significant improvements concern the introduction of the DIN 11851 dairy/food thread for easy and leak-free connection, and the rectangular SS316L mounting plate for maximum strength and chemical/thermal resistance.
The D16 range comes with the following improvements for our customers;
• Increased hydraulic efficiency;
• reduced energy consumption;
• Open impeller allowing solids up to 6 mm;
• PTFE shaft support bushing no longer required;
• Special version available for Electroless Nickel;
• Optional electropolished version.
To complete the DIN 11851 coupling, individual components (nuts, liners and seal-ring) are optionally available. You can find further technical details in our D16 leaflet.
For questions or further information, please contact us at email@example.com or via our online contact form.
Comment récupérer l'investissement dans le nouveau filtre-HE?
L'achat de nouvelles pompes et de nouveaux filtres nécessite toujours un investissement. Pour les constructeurs de machines et les utilisat...
Avantages des filtres HE pour l'industrie du traitement de surface
Les nouveaux filtres HE de Hendor sont la première alternative verte aux pompes et aux filtres pour l'industrie du traitement de surface. E...
L'avenir est vert
Le changement climatique est là ; impossible de l'ignorer. Comme toute autre industrie, l'industrie du traitement de surface en porte &...
Hendor partners up with Pforzheimer OTSM for next level service & support
Both companies will share each others’ expertise in order to innovate for the future.
Best suitable pumps and filters for Reel-to-Reel plating applications
Hendor was the first to set the standard for vertical pumps in Reel-to-Reel plating lines, helping Reel-to-Reel line operators and OEM’s with best i...
Pumps and filters for best performance aluminium anodizing equipment
Hendor provides several pump and filter solutions for aluminium anodizing. Read our recommendations and their benefits for your anodizing equipment.
Underrated in surface finishing: preventive maintenance
Preventive maintenance is crucial for chemical pumps and filters. It prevents unexpected downtime and complete breakdown. Hendor explains the process.
Beneficial for electroless nickel applications: D16 SS
Latest fabrication technologies ensure that the Hendor D16 stainless steel vertical pump range is sealless, dry-run safe, and maintenance free.
This is why you should inspect your centrifugal pumps weekly
Centrifugal pumps & chemical filtration systems should be inspected weekly. Here, you find the correct way to perform the centrifugal pump inspection.
Latest trends in the surface finishing industry identified
September has been special for society as well as the industry. Governments have been lifting restrictions on physical meetings and events.
Hendor celebrates 73 years of craftsmanship
It is our 73th anniversary in the surface finishing industry. We have gathered a lot of knowledge and experience about our products & customers.
Our part in the green industry: electric motors
As from Juli 2021, new European energy standards apply for electric motors. Hendor took measures to do its part in innovating for future generations.
It's always a pleasure doing business with Hendor
The first trimester of 2021 has proven to be just as eventful as 2020. Therefore, our business director reflects on his first four months at Hendor.
How selecting the right filter media reduces the TCO
Choosing the right filter media will lower your Total Cost of Ownership (TCO). We provide the right solution with our wide range of filter media.
Maintenance-free pumps for powder coating spray tunnels
Whenever you are building a powder coating plant, you have two options when it comes to the spray tunnel pumps: a horizontal- or vertical pump.
Hendor HRC: stop expensive precious metal loss
Companies are continuously looking for cost saving measures in their plating shops. Hendor offers a solution with the Hendor Recovery Cell (HRC).
Hendor is ahead of new EU electric motor regulations
Hendor decided to transition its 0,12 .. 0,55 kW electric motors directly to IE3, surpassing the legal minimum of IE2.
Our manufacturing process explained: Assembly & Testing
How do our pumps & filters go from PP to an end product? Step 5: assembly and testing.
Our manufacturing process explained: wet paint coating
How do our pumps & filters arise from PP to an end product? Step 4: wet paint coating the electric motor.
Our manufacturing process explained: plastic welding
How do our pumps & filters arise from PP to an end product? Step 3: plastic welding.
Our manufacturing process explained: mechanical machining
How do our pumps & filters arise from polypropylene (PP) to an end product? Step 2: mechanical machining.
From polypropylene to Hendor end product
How do our pumps & filters arise from polypropylene (PP) to an end product? Step 1: injection molding.
Kees Stigter joins Hendor as our new Sales Director
We welcome a new member to the Hendor team: Kees Stigter. He takes the role of Sales Director, and will be responsible for our global product sales.
The Hendor standard: safe & easy installation and maintenance
When you buy new chemical pumps, you have to take into account the piping. We deliver all our pumps with pre-fabricated three-piece unions.
Hendor DM-series: best of both worlds
Due to the frequent use of different precious metal finishes from various electrolytes, a standard centrifugal pump is not always appropriate.
Hendor celebrates 25 years of presence in North America
This year marks the 25th anniversary of Hendor-PE Inc.. We proudly look back at the way our partners have carried out the Hendor legacy overseas.
Hendor customization: this is how we do it
With decades of experience in designing pumps and filters, our engineering department creates customized specialties tailored to your demands.
D13: less energy, more power
Sustainability means a long product lifetime, but also the reduction of emission. We redeveloped our D110 series and replaced it with our D13 series.
Hendor SHX: stainless steel is the new thermoplastic
The market is in need of pumps and filters which are capable of high performance. Therefore, we developed the SHX series, made out of stainless steel.
Hendor improves the powder coating pre-treatment process
We developed filter technology that keeps the quality of the degreasing fluid constant & clean. The filter remains active longer & captures more dirt.
Hendor presents new robust Basket Strainer
In order to protect both magnetic drive and mechanical seal pumps, we want to introduce our new basket strainer.