Hendor presents new robust Basket Strainer
We as Hendor see a lot of advantages of using our vertical pump systems. Due to technical innovations like a free turning shaft, no pump bearing, and minor seals, this pump system is very reliable and maintenance free. But, sometimes installing a vertical pump system isn’t possible. A lack of tank space, close installed flight bars, and accessibility, are a couple of reasons not to choose for a vertical pump. A horizontal pump could be the solution, but what if you deal with contaminated liquids? Large particles in the liquid can cause major pump problems. Fast wearing of pump bearings and mechanical seals, clogging of the pump, and early failure, are some examples of common problems.
Basket strainer protects magnetic drive and mechanical seal pumps
In order to protect both magnetic drive and mechanical seal pumps, we want to introduce our new basket strainer. By using a fine mesh the pump is protected to particles of 3 mm and larger. Beside this standard mesh the strainer can also be equipped with a fully capsuled neodymium magnet which catch magnetic particles like steel and certain stainless steels. This results in a significant improvement of the lifetime of the pump, less pump maintenance and a way higher uptime of the installation.
Our new and robust basket strainer features:
- Fully injection moulded glass reinforced PP
- Including complete +GF+ union ends
- Screw cap cover including air release valve
- Removable easy to clean basket with 3 mm width perforation
- Small, with 3,5 liter volume and DN50 connection
- Large, with 7,0 liter volume and DN90 connection
Maintenance-free pumps for powder coating spray tunnels
Whenever you are building a powder coating plant, you basically have two options when it comes to the spray tunnel pumps: a horizontal- or vertical pu...
Hendor HRC: stop expensive precious metal loss
In times of skyrocketing prices for precious metals like gold, silver, and palladium, companies are continuously looking for cost saving measures in t...
Hendor is ahead of new EU electric motor regulations
Hendor decided to transition its 0,12 .. 0,55 kW electric motors directly to IE3, surpassing the legal minimum of IE2.
Our manufacturing process explained: Assembly & Testing
How do our pumps & filters go from PP to an end product? Step 5: assembly and testing.
Our manufacturing process explained: wet paint coating
How do our pumps & filters arise from PP to an end product? Step 4: wet paint coating the electric motor.
Our manufacturing process explained: plastic welding
How do our pumps & filters arise from PP to an end product? Step 3: plastic welding.
Our manufacturing process explained: mechanical machining
How do our pumps & filters arise from polypropylene (PP) to an end product? Step 2: mechanical machining.
From polypropylene to Hendor end product
How do our pumps & filters arise from polypropylene (PP) to an end product? Step 1: injection molding.
Kees Stigter joins Hendor as our new Sales Director
With great pride, we welcome a new member to the Hendor team: Kees Stigter. As from today, he takes the role of Sales Director, and will be responsibl...
The Hendor standard: safe & easy installation and maintenance
Installing and connecting pumps to your pipework can take quite some time. We understand that our customers prefer their plants to be up and running a...
Hendor DM-series: best of both worlds
Manufacturing vertical magnetic drive pumps
Hendor celebrates 25 years of presence in North America
This year marks the 25thanniversary of Hendor-PE Inc., our joint venture in the United States. We proudly look back at the way our partners have carri...
Hendor customization: this is how we do it
Finding the best device that suits your plant is not only determined by the quality of a pump or filter. The solution should fit like a glove. Our ran...
D13: less energy, more power
We keep a critical eye on sustainability during the innovation process of our pumps and filters. Sustainability does not only mean a long product life...
Anodizing: plenty steps, a lot of solutions
The aluminium anodizing process requires the right pump and filter solutions. As a result of increasing quality specifications, OEM’s or manufac...
Hendor SHX: stainless steel is the new thermoplastic
Thermoplastic is a commonly used material for pumps in the chemical surface finishing industry. However, we noticed that the market is in need of pump...
Hendor improves the powder coating pre-treatment process
We as Hendor constantly strive for innovation in the pumps and filters for the surface finishing industry. Therefore, we critically look for improveme...
Hendor presents new robust Basket Strainer
We as Hendor see a lot of advantages of using our vertical pump systems. Due to technical innovations like a free turning shaft, no pump bearing, and ...