Hendor improves the powder coating pre-treatment process
We as Hendor constantly strive for innovation in the pumps and filters for the surface finishing industry. Therefore, we critically look for improvements in our products and its applications. This time we found a way to optimize the chemical pre-treatment of powder coating process.
During the powder coating pre-treatment process the chemicals in the spray tunnel are often contaminated and not of constant quality, even with a frequent feed and bleed regime.
How did we optimize the powder coating pre-treatment process?
We developed a filter technology that keeps the quality of the degreasing fluid constant and clean. The filter remains active longer and captures significantly more dirt due to an adsorption filtration system. This technology combines physical separation and adsorption mechanisms successfully. In the end, this results in a continuously cleansed degreasing bath, containing 70% less dirt in the process solution.
Benefits of the adsorption filtration system for the powder coater:
- 90% reduction in adhesion problems
- Less chemical addition for the degreasing bath
- Less solution replacement
- Less maintenance for the powder coating pre-treatment plant
- Nozzles are less likely to clog
- Filter medium is easy to replace
- Reduced waste water volumes
- Higher productivity
- Less rework
What is powder coating pre-treatment?
Powder coating pre-treatment is a chemical process which prepares a surface to be effectively powder coated. The process entails chemical treatment to take off all dirt and oxides. As a next step, a chemical treatment is given to create an intermediate conversion coating to enhance corrosion resistance and adhesion. Besides pre-treatment in a spray tunnel, also dip pre-treatment is commonly used in the surface finishing industry.
Benefits of powder coating pre-treatment:
- Reduces rejection rate
- Increases corrosion resistance
- Enhances adhesion
- Maximizes product life time
Products which can be used for the powder coating pre-treatment process:
Our part in the green industry: electric motors
As from this month, new European energy standards apply for electric motors. These standards are part of the global climate regulations in order for a...
It's always a pleasure doing business with Hendor
The first trimester of this year has proven to be just as eventful as the past entire year. Therefore, our business director Kees Stigter wrote a colu...
How selecting the right filter media reduces the TCO
One underrated aspect of reaching high quality surface finishing and low rejection rates is the selection of filter media.
Maintenance-free pumps for powder coating spray tunnels
Whenever you are building a powder coating plant, you basically have two options when it comes to the spray tunnel pumps: a horizontal- or vertical pu...
Hendor HRC: stop expensive precious metal loss
In times of skyrocketing prices for precious metals like gold, silver, and palladium, companies are continuously looking for cost saving measures in t...
Hendor is ahead of new EU electric motor regulations
Hendor decided to transition its 0,12 .. 0,55 kW electric motors directly to IE3, surpassing the legal minimum of IE2.
Our manufacturing process explained: Assembly & Testing
How do our pumps & filters go from PP to an end product? Step 5: assembly and testing.
Our manufacturing process explained: wet paint coating
How do our pumps & filters arise from PP to an end product? Step 4: wet paint coating the electric motor.
Our manufacturing process explained: plastic welding
How do our pumps & filters arise from PP to an end product? Step 3: plastic welding.
Our manufacturing process explained: mechanical machining
How do our pumps & filters arise from polypropylene (PP) to an end product? Step 2: mechanical machining.
From polypropylene to Hendor end product
How do our pumps & filters arise from polypropylene (PP) to an end product? Step 1: injection molding.
Kees Stigter joins Hendor as our new Sales Director
With great pride, we welcome a new member to the Hendor team: Kees Stigter. As from today, he takes the role of Sales Director, and will be responsibl...
The Hendor standard: safe & easy installation and maintenance
Installing and connecting pumps to your pipework can take quite some time. We understand that our customers prefer their plants to be up and running a...
Hendor DM-series: best of both worlds
Manufacturing vertical magnetic drive pumps
Hendor celebrates 25 years of presence in North America
This year marks the 25thanniversary of Hendor-PE Inc., our joint venture in the United States. We proudly look back at the way our partners have carri...
Hendor customization: this is how we do it
Finding the best device that suits your plant is not only determined by the quality of a pump or filter. The solution should fit like a glove. Our ran...
D13: less energy, more power
We keep a critical eye on sustainability during the innovation process of our pumps and filters. Sustainability does not only mean a long product life...
Anodizing: plenty steps, a lot of solutions
The aluminium anodizing process requires the right pump and filter solutions. As a result of increasing quality specifications, OEM’s or manufac...
Hendor SHX: stainless steel is the new thermoplastic
Thermoplastic is a commonly used material for pumps in the chemical surface finishing industry. However, we noticed that the market is in need of pump...
Hendor improves the powder coating pre-treatment process
We as Hendor constantly strive for innovation in the pumps and filters for the surface finishing industry. Therefore, we critically look for improveme...
Hendor presents new robust Basket Strainer
We as Hendor see a lot of advantages of using our vertical pump systems. Due to technical innovations like a free turning shaft, no pump bearing, and ...