Latest trends in the surface finishing industry identified
Hendor was present on both occasions with a booth. As we were very excited to see and speak to everyone, we were also very curious of what is happening in the branch. After many conversations, we identified some key trends:
1. Will business pick up its pace again?
While the global industry is emerging from the Covid recession, it becomes more and more clear that the intricate international structure of manufacturing, stocking and logistics has been bruised while the handbrakes were pulled. Throughout the industry, shortages of raw materials and components are reported to slow down industry’s pace. Shortages and demand also raise manufacturing cost, due to steeply rising prices of materials, energy, and transport. The reduced output of the automotive industry, due to lack of semiconductor components, is exemplary for what is happening throughout the industry. Similar effects are caused by shortages of common chemicals and the industry’s materials and components like polypropylene and electromotors.
Although gears of global industry have started to turn faster, the hick-ups and hurdles make it difficult to foresee how productivity and output will develop in Q4 of this year. Also predictions for 2022 are still difficult to make. Much will depend on how much time the international business and industry will need to re-establish its global dynamic stability.
2. Awareness and sustainability
Today, it is becoming visible; the industry has started to embrace climate. Not just as a market, but also as a goal for itself. Beyond the pressure of legislation, companies are looking into becoming sustainable. Seen from the outside, our surface treatment industry is laced with metals and hazardous chemistry. At the inside, everybody knows that many, many efforts have already been made to phase out hazardous and polluting substances from products and processes, while product and process optimizations are applied for lower consumption and reduction of waste.
Companies are now also looking into reduction of carbon footprint and energy consumption. While on the one hand investing to take their consumed energy from renewable sources, more and more solutions are offered to reduce energy consumption itself. Ranging from processes that work at lower temperatures to insulation and equipment with higher energy efficiency.
Hendor is ready for the future
On product level, Hendor has always made efforts to prevent spillage of materials. Using highest quality materials and engineering reliable and durable designs, the motto is: “What does not break down, does not need to be replaced”. And if finally something breaks down, than Hendor products have been designed with repairability in mind, without discarding whole filtration units.
The recent introduction of the Hendor Excellence series filter pumps is a new chapter in energy efficiency. Hydrodynamical enhancements have resulted in >50% less internal pressure loss, which translates to energy that is not consumed. A second effect of the new design is increased service life of filter media. The longer they last, the less chemical waste is generated. Finally, new design and optimized manufacturing techniques ensure that our premium filter pumps will last even longer than they already did.
As our goal was during the events, we would like to create an open conversation on the future of the surface finishing industry. What are your thoughts and opinions on the matters described above? Feel free to send us your input! Lastly, we would like to take the opportunity to thank ZVO and VOM, Vereniging ION, and Mikrocentrum for the greatly organized events.
Wie sich die Investition in den neuen HE-Filter rentiert
Die Anschaffung von neuen Pumpen und Filtern ist immer mit einer Investition verbunden. Für Maschinenbauer und Endanwender in der Oberfläche...
Vorteile der HE-Filter für die Oberflächenindustrie
Die neuen Hendor HE-Filter sind die erste umweltfreundliche Alternative zu Pumpen und Filtern für die Oberflächenindustrie. Mit Blick auf di...
Die Zukunft ist grün
Wir können den Klimawandel nicht länger ignorieren. Wie jeder andere Industriezweig trägt auch die Oberflächenbehandlungsindustrie...
Hendor und Pforzheimer OTSM schließen Partnerschaft für Service und Unterstützung der höchste Stufe
Beide Unternehmen werden das Know-how des jeweils anderen nutzen, um Innovationen für die Zukunft zu entwickeln.
Best suitable pumps and filters for Reel-to-Reel plating applications
Hendor was the first to set the standard for vertical pumps in Reel-to-Reel plating lines, helping Reel-to-Reel line operators and OEM’s with best i...
Pumps and filters for best performance aluminium anodizing equipment
Hendor provides several pump and filter solutions for aluminium anodizing. Read our recommendations and their benefits for your anodizing equipment.
Underrated in surface finishing: preventive maintenance
Preventive maintenance is crucial for chemical pumps and filters. It prevents unexpected downtime and complete breakdown. Hendor explains the process.
Beneficial for electroless nickel applications: D16 SS
Latest fabrication technologies ensure that the Hendor D16 stainless steel vertical pump range is sealless, dry-run safe, and maintenance free.
This is why you should inspect your centrifugal pumps weekly
Centrifugal pumps & chemical filtration systems should be inspected weekly. Here, you find the correct way to perform the centrifugal pump inspection.
Latest trends in the surface finishing industry identified
September has been special for society as well as the industry. Governments have been lifting restrictions on physical meetings and events.
Hendor celebrates 73 years of craftsmanship
It is our 73th anniversary in the surface finishing industry. We have gathered a lot of knowledge and experience about our products & customers.
Our part in the green industry: electric motors
As from Juli 2021, new European energy standards apply for electric motors. Hendor took measures to do its part in innovating for future generations.
It's always a pleasure doing business with Hendor
The first trimester of 2021 has proven to be just as eventful as 2020. Therefore, our business director reflects on his first four months at Hendor.
How selecting the right filter media reduces the TCO
Choosing the right filter media will lower your Total Cost of Ownership (TCO). We provide the right solution with our wide range of filter media.
Maintenance-free pumps for powder coating spray tunnels
Whenever you are building a powder coating plant, you have two options when it comes to the spray tunnel pumps: a horizontal- or vertical pump.
Hendor HRC: stop expensive precious metal loss
Companies are continuously looking for cost saving measures in their plating shops. Hendor offers a solution with the Hendor Recovery Cell (HRC).
Hendor is ahead of new EU electric motor regulations
Hendor decided to transition its 0,12 .. 0,55 kW electric motors directly to IE3, surpassing the legal minimum of IE2.
Our manufacturing process explained: Assembly & Testing
How do our pumps & filters go from PP to an end product? Step 5: assembly and testing.
Our manufacturing process explained: wet paint coating
How do our pumps & filters arise from PP to an end product? Step 4: wet paint coating the electric motor.
Our manufacturing process explained: plastic welding
How do our pumps & filters arise from PP to an end product? Step 3: plastic welding.
Our manufacturing process explained: mechanical machining
How do our pumps & filters arise from polypropylene (PP) to an end product? Step 2: mechanical machining.
From polypropylene to Hendor end product
How do our pumps & filters arise from polypropylene (PP) to an end product? Step 1: injection molding.
Kees Stigter joins Hendor as our new Sales Director
We welcome a new member to the Hendor team: Kees Stigter. He takes the role of Sales Director, and will be responsible for our global product sales.
The Hendor standard: safe & easy installation and maintenance
When you buy new chemical pumps, you have to take into account the piping. We deliver all our pumps with pre-fabricated three-piece unions.
Hendor DM-series: best of both worlds
Due to the frequent use of different precious metal finishes from various electrolytes, a standard centrifugal pump is not always appropriate.
Hendor celebrates 25 years of presence in North America
This year marks the 25th anniversary of Hendor-PE Inc.. We proudly look back at the way our partners have carried out the Hendor legacy overseas.
Hendor customization: this is how we do it
With decades of experience in designing pumps and filters, our engineering department creates customized specialties tailored to your demands.
D13: less energy, more power
Sustainability means a long product lifetime, but also the reduction of emission. We redeveloped our D110 series and replaced it with our D13 series.
Hendor SHX: stainless steel is the new thermoplastic
The market is in need of pumps and filters which are capable of high performance. Therefore, we developed the SHX series, made out of stainless steel.
Hendor improves the powder coating pre-treatment process
We developed filter technology that keeps the quality of the degreasing fluid constant & clean. The filter remains active longer & captures more dirt.
Hendor presents new robust Basket Strainer
In order to protect both magnetic drive and mechanical seal pumps, we want to introduce our new basket strainer.