Hendor customization: this is how we do it
Finding the best device that suits your plant is not only determined by the quality of a pump or filter. The solution should fit like a glove. Our range of available pumps and filters mostly complies for installations with certain generic specifications. So what if your application differs from these specifications? With decades of experience in designing pump and filtration systems, our engineering department creates customized specialties tailored to your demands.
How does customization at Hendor work?
First and foremost, our experienced specialists will thoroughly discuss your specific requirements and conditions. Subsequently, we draft a design in which we come up with a solution using modular components as well as incorporating standard and purpose engineered components to one integrated device. During the design phase, we take into account many relevant factors such as power consumption, maintainability, running cost, etc. The result: a robust, reliable and economic device, specially tuned to your needs and process conditions.
A few examples of our customization portfolio:
For a tier one Aerospace company, we designed and built a specialty filtration system. Due to local environmental legislation it was not allowed to make the in- and outlet connection for the filter at the bottom of their electroplating tanks. This would pose a too high risk for chemical spills according the authorities. Our solution: a reliable self-priming filter system for suction over the tank edge, by incorporating a priming chamber.
At an automotive subcontractor with high internal safety standards, it was not allowed to stop process agitation during filter maintenance. At the same time, safety requirements demanded automated control to prevent human errors. We equipped a specially designed filtration system with a “safe lock-out”, consisting of a by-pass system and +GF+ pneumatic valves. This system is controlled from the central line panel and allows safe working conditions during filter maintenance. Additionally, the valves close automatically in case of pressure loss to by-pass the filter and maintain agitation. This extra feature increases being safe under all conditions and, equally important, prevents risk on rejection of products due to non-agitation.
Through Atotech, an end-user of their latest high alkaline and high temperature paint stripper approached us with a list of challenging requests. They searched for a filtration system with chemical and temperature resistance, dirt and sludge capacity, as well as easy maintenance and durability. After a thorough evaluation and engineering process, we designed a filtration system with a stainless steel 316 pump, bag filter used as pre-filter, and a large surface polypropylene (PP) horizontal disc filter used as main filter to catch the final very fine and sticky dissolved paint particles.
Do you have any customization demand regarding your pump and filtration system? Feel free to contact us so we can jointly determine the best possible solution.
Zo verdient u de investering in de nieuwe HE-filter terug
De aanschaf van nieuwe pompen en filters vraagt altijd om een investering. Voor machinebouwers en eindgebruikers binnen de oppervlaktebehandelende ind...
Voordelen van de HE-filters voor de oppervlaktebehandelende industrie
De nieuwe Hendor HE-filters zijn het eerste groene alternatief voor pompen en filters voor de oppervlaktebehandelende industrie. Met de groeiende impa...
De toekomst is groen
Klimaatverandering kan niet langer worden genegeerd. Net als elke andere industrie is het een effect waarvoor de oppervlaktebehandelende industrie ver...
Hendor partners up with Pforzheimer OTSM for next level service & support
Both companies will share each others’ expertise in order to innovate for the future.
Best suitable pumps and filters for Reel-to-Reel plating applications
Hendor was the first to set the standard for vertical pumps in Reel-to-Reel plating lines, helping Reel-to-Reel line operators and OEM’s with best i...
Pumps and filters for best performance aluminium anodizing equipment
Hendor provides several pump and filter solutions for aluminium anodizing. Read our recommendations and their benefits for your anodizing equipment.
Underrated in surface finishing: preventive maintenance
Preventive maintenance is crucial for chemical pumps and filters. It prevents unexpected downtime and complete breakdown. Hendor explains the process.
Beneficial for electroless nickel applications: D16 SS
Latest fabrication technologies ensure that the Hendor D16 stainless steel vertical pump range is sealless, dry-run safe, and maintenance free.
This is why you should inspect your centrifugal pumps weekly
Centrifugal pumps & chemical filtration systems should be inspected weekly. Here, you find the correct way to perform the centrifugal pump inspection.
Latest trends in the surface finishing industry identified
September has been special for society as well as the industry. Governments have been lifting restrictions on physical meetings and events.
Hendor celebrates 73 years of craftsmanship
It is our 73th anniversary in the surface finishing industry. We have gathered a lot of knowledge and experience about our products & customers.
Our part in the green industry: electric motors
As from Juli 2021, new European energy standards apply for electric motors. Hendor took measures to do its part in innovating for future generations.
It's always a pleasure doing business with Hendor
The first trimester of 2021 has proven to be just as eventful as 2020. Therefore, our business director reflects on his first four months at Hendor.
How selecting the right filter media reduces the TCO
Choosing the right filter media will lower your Total Cost of Ownership (TCO). We provide the right solution with our wide range of filter media.
Maintenance-free pumps for powder coating spray tunnels
Whenever you are building a powder coating plant, you have two options when it comes to the spray tunnel pumps: a horizontal- or vertical pump.
Hendor HRC: stop expensive precious metal loss
Companies are continuously looking for cost saving measures in their plating shops. Hendor offers a solution with the Hendor Recovery Cell (HRC).
Hendor is ahead of new EU electric motor regulations
Hendor decided to transition its 0,12 .. 0,55 kW electric motors directly to IE3, surpassing the legal minimum of IE2.
Our manufacturing process explained: Assembly & Testing
How do our pumps & filters go from PP to an end product? Step 5: assembly and testing.
Our manufacturing process explained: wet paint coating
How do our pumps & filters arise from PP to an end product? Step 4: wet paint coating the electric motor.
Our manufacturing process explained: plastic welding
How do our pumps & filters arise from PP to an end product? Step 3: plastic welding.
Our manufacturing process explained: mechanical machining
How do our pumps & filters arise from polypropylene (PP) to an end product? Step 2: mechanical machining.
From polypropylene to Hendor end product
How do our pumps & filters arise from polypropylene (PP) to an end product? Step 1: injection molding.
Kees Stigter joins Hendor as our new Sales Director
We welcome a new member to the Hendor team: Kees Stigter. He takes the role of Sales Director, and will be responsible for our global product sales.
The Hendor standard: safe & easy installation and maintenance
When you buy new chemical pumps, you have to take into account the piping. We deliver all our pumps with pre-fabricated three-piece unions.
Hendor DM-series: best of both worlds
Due to the frequent use of different precious metal finishes from various electrolytes, a standard centrifugal pump is not always appropriate.
Hendor celebrates 25 years of presence in North America
This year marks the 25th anniversary of Hendor-PE Inc.. We proudly look back at the way our partners have carried out the Hendor legacy overseas.
Hendor customization: this is how we do it
With decades of experience in designing pumps and filters, our engineering department creates customized specialties tailored to your demands.
D13: less energy, more power
Sustainability means a long product lifetime, but also the reduction of emission. We redeveloped our D110 series and replaced it with our D13 series.
Hendor SHX: stainless steel is the new thermoplastic
The market is in need of pumps and filters which are capable of high performance. Therefore, we developed the SHX series, made out of stainless steel.
Hendor improves the powder coating pre-treatment process
We developed filter technology that keeps the quality of the degreasing fluid constant & clean. The filter remains active longer & captures more dirt.
Hendor presents new robust Basket Strainer
In order to protect both magnetic drive and mechanical seal pumps, we want to introduce our new basket strainer.