Anodizing: plenty steps, a lot of solutions
The aluminium anodizing process requires the right pump and filter solutions. As a result of increasing quality specifications, OEM’s or manufacturers look for solutions which can optimize their installations at a fair price. We totally understand this way of thinking. However, we find it even more important that the quality of pumps and filters ensures a long product lifetime, and with that, the lowest total cost in the end possible.
The process of aluminium anodizing contains electrochemical conversion of metal surfaces into corrosion-resistant, durable finishes. Next to aluminium, also magnesium and titanium can be anodized. Anodizing aluminium surfaces takes several steps, which call for specific equipment. For the anodizing industry, Hendor provides an array of pump and filter systems which assist in the anodizing process.
Hot Seal filtration
Surface smut regularly occurs in the anodizing process. This smut necessitates labor intensive post-treatment. In addition, contaminated baths require replacement and re-heating. Hot seal baths are typically filtrated at 1-1,5 turnover per hour to avoid sealing smut. Due to the high temperature (generally 96-100 °C), manufacturers use stainless steel cartridge filter pumps. But, in our opinion, this is not the most optimal choice. Hendor provides a very robust PP horizontal disc filter system with mechanical seal pump which well withstands the hot seal bath temperature, because it is made from Simona® high-grade Alpha PlusTM PP.
The advantages of PP filter systems over stainless steel filter units are:
- Significantly lower investment costs
- Lower operating costs due to use of low cost filter paper
- Less energy losses due to PP’s excellent thermal insulation properties
- No corrosion of pump and filter
- Less disposal costs (cartridges are chemical waste)
- Ease of handling due to partitioned filter disc stacks
Hendor’s PP horizontal disc filter systems are standard available with capacity up to 30 m3/h. Though initially developed for hot seal application, these filter systems are also well suited for use with cold seal baths, electrolytic coloring, and rinse tanks.
For hot and cold seal, coloring tanks, and rinse tanks, both cartridge filtration and disc filtration can be used – we supply both. But, we recommend using discs. Why? The use of filter paper results in low filter media costs, low waste volume, and lower disposal costs. Down time of the filter unit is avoided by having an additional disc stacks available for immediate exchange.
Residual oil and grease removal
Organic contaminants, originating e.g. from the extrusion process or subsequent handling prior to the surface treatment, can pollute baths and lead to inferior anodizing and/or coloring quality. Hendor provides a special PP filter unit with specially activated adsorption fibers. These fibers are made of plasma-charged PP, which adsorb the non-emulsified oils and greases up to 5-6 times their own weight. Using this effective filter system results in:
- Improved anodizing and/or coloring process
- Improved product quality
- Longer bath lifetime / less costs involved in chemistry
- Less water usage
Bath circulation / agitation
For an optimum and homogeneous anodizing process, and subsequent stable product quality, sufficient bath circulation/agitation is of utmost importance. Rather than using a large circulation pump, a smaller sized pump in combination with eductors can be used. Due to the venturi design of the eductors, the resulting circulation flow can be 5 times the pump input.
Pump / eductor systems are ideal to replace conventional air agitation thereby avoiding the inherent disadvantages associated with air agitations. The advantages of using pump/eductor tank circulation are:
- Less to no acid mist above the tank (sulphuric acid mist is carcinogenic)
- Bath conductivity improvement leading to faster processing
- Lower energy consumption
- More stable process due to less temperature variation
- No dirt intake by polluted pressurised air
For bath circulation we advise our well-known robust vertical PP pumps. In those situations where the tanks do not allow sufficient space for these vertical pumps, the special Out-of-Tank versions can be used, thereby maintaining the advantages intrinsic for Hendor’s vertical pumps without requiring tank space. Due to the single, stainless steel shaft, oversized motor bearings, and absence of bearings or seals in the volute, these pumps are very reliable and can essentially operate maintenance-free. Pumps and eductors are available in various sizes to suit each bath geometry.
In sum, we provide several solutions for the anodizing process: robust PP horizontal disc filter system with mechanical seal pump, disc filtration and filter paper, special PP filter unit with oil adsorption fibers, vertical pumps (in tank or out of tank) and eductors.
In case you are interested in more details about one specific product, feel free to contact the Hendor team.
Beneficial for electroless nickel applications: D16 SS
Latest fabrication technologies ensure that the Hendor D16 stainless steel vertical pump range is sealless, dry-run safe, and maintenance free.
This is why you should inspect your centrifugal pumps weekly
Centrifugal pumps and chemical filtration systems should be inspected weekly. In this article, you find the correct way to perform the centrifugal pum...
Latest trends in the surface finishing industry identified
September has been special for society as well as the industry. Governments have been lifting restrictions on physical meetings and events.
Hendor celebrates 73 years of craftsmanship
Today marks our 73th anniversary in the surface finishing industry. In this long period of time, we have gathered a lot of knowledge and experience ab...
Our part in the green industry: electric motors
As from this month, new European energy standards apply for electric motors. These standards are part of the global climate regulations in order for a...
It's always a pleasure doing business with Hendor
The first trimester of this year has proven to be just as eventful as the past entire year. Therefore, our business director Kees Stigter wrote a colu...
How selecting the right filter media reduces the TCO
One underrated aspect of reaching high quality surface finishing and low rejection rates is the selection of filter media.
Maintenance-free pumps for powder coating spray tunnels
Whenever you are building a powder coating plant, you basically have two options when it comes to the spray tunnel pumps: a horizontal- or vertical pu...
Hendor HRC: stop expensive precious metal loss
In times of skyrocketing prices for precious metals like gold, silver, and palladium, companies are continuously looking for cost saving measures in t...
Hendor is ahead of new EU electric motor regulations
Hendor decided to transition its 0,12 .. 0,55 kW electric motors directly to IE3, surpassing the legal minimum of IE2.
Our manufacturing process explained: Assembly & Testing
How do our pumps & filters go from PP to an end product? Step 5: assembly and testing.
Our manufacturing process explained: wet paint coating
How do our pumps & filters arise from PP to an end product? Step 4: wet paint coating the electric motor.
Our manufacturing process explained: plastic welding
How do our pumps & filters arise from PP to an end product? Step 3: plastic welding.
Our manufacturing process explained: mechanical machining
How do our pumps & filters arise from polypropylene (PP) to an end product? Step 2: mechanical machining.
From polypropylene to Hendor end product
How do our pumps & filters arise from polypropylene (PP) to an end product? Step 1: injection molding.
Kees Stigter joins Hendor as our new Sales Director
With great pride, we welcome a new member to the Hendor team: Kees Stigter. As from today, he takes the role of Sales Director, and will be responsibl...
The Hendor standard: safe & easy installation and maintenance
Installing and connecting pumps to your pipework can take quite some time. We understand that our customers prefer their plants to be up and running a...
Hendor DM-series: best of both worlds
Manufacturing vertical magnetic drive pumps
Hendor celebrates 25 years of presence in North America
This year marks the 25thanniversary of Hendor-PE Inc., our joint venture in the United States. We proudly look back at the way our partners have carri...
Hendor customization: this is how we do it
Finding the best device that suits your plant is not only determined by the quality of a pump or filter. The solution should fit like a glove. Our ran...
D13: less energy, more power
We keep a critical eye on sustainability during the innovation process of our pumps and filters. Sustainability does not only mean a long product life...
Anodizing: plenty steps, a lot of solutions
The aluminium anodizing process requires the right pump and filter solutions. As a result of increasing quality specifications, OEM’s or manufac...
Hendor SHX: stainless steel is the new thermoplastic
Thermoplastic is a commonly used material for pumps in the chemical surface finishing industry. However, we noticed that the market is in need of pump...
Hendor improves the powder coating pre-treatment process
We as Hendor constantly strive for innovation in the pumps and filters for the surface finishing industry. Therefore, we critically look for improveme...
Hendor presents new robust Basket Strainer
We as Hendor see a lot of advantages of using our vertical pump systems. Due to technical innovations like a free turning shaft, no pump bearing, and ...