Hendor expands network with Galber in Mexico
Hendor has entered into a partnership with Galber from Mexico as of January 1, 2023. Together, the companies will work to optimize the supply of high-quality chemical pumps and filters for the surface finishing industry in Mexico.
Innovation, service and partnershipWith this partnership, Hendor continues to build on its strategy to provide the surface finishing industry with smart technology for future generations. Galber will act as certified non-exclusive distributor of all Hendor pumps, filters and service.
Hendor highly values its service and believes it has found an equal partner in Galber. Both family businesses attach great importance to innovation, service and partnership. To ensure this, Galber will hold its own stock in Guadalajara to supply customers as quickly as possible. In addition, training sessions with the sales team are organized on a regular basis to convey Hendor's years of knowledge and expertise in a thorough manner.
Kees Stigter, Global Sales Director at Hendor, on the partnership:
"With Galber, Hendor has partnered with an experienced and respected supplier in Mexican surface treatment market. In over 50 years of experience, Galber has built an extensive network with national coverage in Mexico. Its professional management and long-standing cooperation with well-known chemical suppliers from Europe and the United States, provide an excellent starting point for a successful collaboration between our two companies. With on-site training at Galber and ongoing technical advice from the Netherlands, Hendor underscores the positive prospects for our cooperation."
Andrés Álvarez, general director of Galber, on the partnership:
“As part of our value promise and with the goal of offering our customers an increasingly complete solution, Galber is entering into a strategic alliance with Hendor. With this, we as Galber bring our customers a new line of high-quality and innovative products, continuing to reinforce our value promise: to be a strategic partner for the electroplating industry in Mexico.”
Hendor is an innovative manufacturer of high quality corrosion resistant chemical pumps and filters. Based in the Netherlands and founded in 1948. For 75 years, Hendor has manufactured and supplied a wide range of high-quality pumps and filters for the metalworking industry, printed circuit boards, connectors and semiconductors.
Founded by a Mexican entrepreneurial family, Galber was initially dedicated to the manufacture and commercialization of products for the electroplating industry.
For more than 50 years, Galber has worked to improve and develop processes that have enabled the company to grow and achieve business goals. With the passage of time and the will the founder managed to instill along with the current CEO, Galber became synonymous with service, quality and support for small, medium and large companies in the industry. Recently, the family business has evolved into a multi-division enterprise that strives to be a leader in industrial sectors by offering customers a variety of solutions for surface treatment, packaging materials and industrial chemicals, integrated by world-class products, technology, highly-qualified services and equipment.
Hendor expands network with Galber in Mexico
Hendor has entered into a partnership with Galber from Mexico as of January 1, 2023. Together, the companies will work to optimize the supply of high-...
The driving force behind 75 years of Hendor
75 years of Hendor: Marja Kaethoven, Hessel Bohncke and Paul van Ham proudly look back on the heritage they hope to pass on to the next generation.
Anodizing Hot Seal more sustainable and profitable? Start with Filtration!
By using the Hendor Hot Seal filtration systems, anodizing plants reduce hot seal dilution requirements by at least 10 times.
This is why you should use vertical pumps for scrubber applications
It still is pretty common to see horizontal pumps being used in scrubber applications. Hendor believes that vertical sealless immersion, dry run safe...
How selecting the right filter media reduces your TCO
Choosing the right filter media will lower your Total Cost of Ownership (TCO). We provide the right solution with our wide range of filter media.
Hendor Excellence filter experience
Just one more week before Hendor is launching the new range of HE-filters for the surface finishing industry. It is the first installment of a new gen...
How to recoup your investment in the new HE-filter
The purchase of new pumps and filters always requires an investment. For machine builders and end users within the surface finishing industry, the mos...
Benefits of HE-filters for the surface finishing industry
The new Hendor HE-filters are the first green alternative to pumps and filters for the surface finishing industry. With the industry's growing imp...
The future is green
Climate change can’t be ignored anymore. Like any other industry, it is an effect for which the surface finishing industry carries responsibilit...
Hendor partners up with Pforzheimer OTSM for next level service & support
Both companies will share each others’ expertise in order to innovate for the future.
Best suitable pumps and filters for Reel-to-Reel plating applications
Hendor was the first to set the standard for vertical pumps in Reel-to-Reel plating lines, helping Reel-to-Reel line operators and OEM’s with best i...
Pumps and filters for best performance aluminium anodizing equipment
Hendor provides several pump and filter solutions for aluminium anodizing. Read our recommendations and their benefits for your anodizing equipment.
Underrated in surface finishing: preventive maintenance
Preventive maintenance is crucial for chemical pumps and filters. It prevents unexpected downtime and complete breakdown. Hendor explains the process.
Beneficial for electroless nickel applications: D16 SS
Latest fabrication technologies ensure that the Hendor D16 stainless steel vertical pump range is sealless, dry-run safe, and maintenance free.
This is why you should inspect your centrifugal pumps weekly
Centrifugal pumps & chemical filtration systems should be inspected weekly. Here, you find the correct way to perform the centrifugal pump inspection.
Latest trends in the surface finishing industry identified
September has been special for society as well as the industry. Governments have been lifting restrictions on physical meetings and events.
Hendor celebrates 73 years of craftsmanship
It is our 73th anniversary in the surface finishing industry. We have gathered a lot of knowledge and experience about our products & customers.
Our part in the green industry: electric motors
As from Juli 2021, new European energy standards apply for electric motors. Hendor took measures to do its part in innovating for future generations.
It's always a pleasure doing business with Hendor
The first trimester of 2021 has proven to be just as eventful as 2020. Therefore, our business director reflects on his first four months at Hendor.
Maintenance-free pumps for powder coating spray tunnels
Whenever you are building a powder coating plant, you have two options when it comes to the spray tunnel pumps: a horizontal- or vertical pump.
Hendor HRC: stop expensive precious metal loss
Companies are continuously looking for cost saving measures in their plating shops. Hendor offers a solution with the Hendor Recovery Cell (HRC).
Hendor is ahead of new EU electric motor regulations
Hendor decided to transition its 0,12 .. 0,55 kW electric motors directly to IE3, surpassing the legal minimum of IE2.
Our manufacturing process explained: Assembly & Testing
How do our pumps & filters go from PP to an end product? Step 5: assembly and testing.
Our manufacturing process explained: wet paint coating
How do our pumps & filters arise from PP to an end product? Step 4: wet paint coating the electric motor.
Our manufacturing process explained: plastic welding
How do our pumps & filters arise from PP to an end product? Step 3: plastic welding.
Our manufacturing process explained: mechanical machining
How do our pumps & filters arise from polypropylene (PP) to an end product? Step 2: mechanical machining.
From polypropylene to Hendor end product
How do our pumps & filters arise from polypropylene (PP) to an end product? Step 1: injection molding.
Kees Stigter joins Hendor as our new Sales Director
We welcome a new member to the Hendor team: Kees Stigter. He takes the role of Sales Director, and will be responsible for our global product sales.
The Hendor standard: safe & easy installation and maintenance
When you buy new chemical pumps, you have to take into account the piping. We deliver all our pumps with pre-fabricated three-piece unions.
Hendor DM-series: best of both worlds
Due to the frequent use of different precious metal finishes from various electrolytes, a standard centrifugal pump is not always appropriate.
Hendor celebrates 25 years of presence in North America
This year marks the 25th anniversary of Hendor-PE Inc.. We proudly look back at the way our partners have carried out the Hendor legacy overseas.
Hendor customization: this is how we do it
With decades of experience in designing pumps and filters, our engineering department creates customized specialties tailored to your demands.
D13: less energy, more power
Sustainability means a long product lifetime, but also the reduction of emission. We redeveloped our D110 series and replaced it with our D13 series.
Hendor SHX: stainless steel is the new thermoplastic
The market is in need of pumps and filters which are capable of high performance. Therefore, we developed the SHX series, made out of stainless steel.
Hendor improves the powder coating pre-treatment process
We developed filter technology that keeps the quality of the degreasing fluid constant & clean. The filter remains active longer & captures more dirt.
Hendor presents new robust Basket Strainer
In order to protect both magnetic drive and mechanical seal pumps, we want to introduce our new basket strainer.