Hendor HRC: stop expensive precious metal loss
In times of skyrocketing prices for precious metals like gold, silver, and palladium, companies are continuously looking for cost saving measures in their plating shops. Alternative processes are often not available, impact product quality, or still contain precious metals. As a result, cost saving is commonly pursued by reduction of metal consumption. Hendor now offers the Hendor Recovery Cell (HRC) for precious metal recovery with highest reclaim efficiency available.
Highly efficient precious metal reclaim directly at your rinse tank
Precious metal loss is very common in the production processes of plating companies. During the plating process, drag-out losses end up in rinsing water, and eventually go down the drain. Frequently used ion exchange (IX) reclaim systems maybe relatively inexpensive to purchase, but impose high post-processing reclaim costs. With the HRC, precious metals are reclaimed by applying a highly efficient plate-out process, ready to be shipped to your refiner after determining its weight. How that actually works?
A fine cylindric metallic matrix is inserted into the HRC, acting as a cathode. The constant high liquid velocity induces strong turbulence at the cathode. High turbulence inside the Hendor HRC system, enhances mass transport, and continuously exposes the cathode to fresh ions. Thus, plate out at significant rate and down to very low concentration is guaranteed. The cathode can hold a large quantity of solid, plated precious metal without intermediate maintenance, or causing an anode-cathode short circuit. Once fully loaded, the cathode can be removed easily. Accountability is assured simply by weighing the cathode before sending it out to the refinery.
Benefits of the Hendor HRC
In the end, the investment in a HRC results in a cost reduction for plating companies. Other advantages of the HRC are:
- Full PP construction
- Low energy operating costs
- Optimal high speed separation
- Inexpensive/disposable cathodes
- Precise record keeping + metal extraction
- Easy inexpensive processing
- Little floor space required
- High quality 100W pe rectifier
- Applicable for both rinse water and spent electrolytes
Hendor expands network with Galber in Mexico
Hendor has entered into a partnership with Galber from Mexico as of January 1, 2023. Together, the companies will work to optimize the supply of high-...
The driving force behind 75 years of Hendor
75 years of Hendor: Marja Kaethoven, Hessel Bohncke and Paul van Ham proudly look back on the heritage they hope to pass on to the next generation.
Anodizing Hot Seal more sustainable and profitable? Start with Filtration!
By using the Hendor Hot Seal filtration systems, anodizing plants reduce hot seal dilution requirements by at least 10 times.
This is why you should use vertical pumps for scrubber applications
It still is pretty common to see horizontal pumps being used in scrubber applications. Hendor believes that vertical sealless immersion, dry run safe...
How selecting the right filter media reduces your TCO
Choosing the right filter media will lower your Total Cost of Ownership (TCO). We provide the right solution with our wide range of filter media.
Hendor Excellence filter experience
Just one more week before Hendor is launching the new range of HE-filters for the surface finishing industry. It is the first installment of a new gen...
How to recoup your investment in the new HE-filter
The purchase of new pumps and filters always requires an investment. For machine builders and end users within the surface finishing industry, the mos...
Benefits of HE-filters for the surface finishing industry
The new Hendor HE-filters are the first green alternative to pumps and filters for the surface finishing industry. With the industry's growing imp...
The future is green
Climate change can’t be ignored anymore. Like any other industry, it is an effect for which the surface finishing industry carries responsibilit...
Hendor partners up with Pforzheimer OTSM for next level service & support
Both companies will share each others’ expertise in order to innovate for the future.
Best suitable pumps and filters for Reel-to-Reel plating applications
Hendor was the first to set the standard for vertical pumps in Reel-to-Reel plating lines, helping Reel-to-Reel line operators and OEM’s with best i...
Pumps and filters for best performance aluminium anodizing equipment
Hendor provides several pump and filter solutions for aluminium anodizing. Read our recommendations and their benefits for your anodizing equipment.
Underrated in surface finishing: preventive maintenance
Preventive maintenance is crucial for chemical pumps and filters. It prevents unexpected downtime and complete breakdown. Hendor explains the process.
Beneficial for electroless nickel applications: D16 SS
Latest fabrication technologies ensure that the Hendor D16 stainless steel vertical pump range is sealless, dry-run safe, and maintenance free.
This is why you should inspect your centrifugal pumps weekly
Centrifugal pumps & chemical filtration systems should be inspected weekly. Here, you find the correct way to perform the centrifugal pump inspection.
Latest trends in the surface finishing industry identified
September has been special for society as well as the industry. Governments have been lifting restrictions on physical meetings and events.
Hendor celebrates 73 years of craftsmanship
It is our 73th anniversary in the surface finishing industry. We have gathered a lot of knowledge and experience about our products & customers.
Our part in the green industry: electric motors
As from Juli 2021, new European energy standards apply for electric motors. Hendor took measures to do its part in innovating for future generations.
It's always a pleasure doing business with Hendor
The first trimester of 2021 has proven to be just as eventful as 2020. Therefore, our business director reflects on his first four months at Hendor.
Maintenance-free pumps for powder coating spray tunnels
Whenever you are building a powder coating plant, you have two options when it comes to the spray tunnel pumps: a horizontal- or vertical pump.
Hendor HRC: stop expensive precious metal loss
Companies are continuously looking for cost saving measures in their plating shops. Hendor offers a solution with the Hendor Recovery Cell (HRC).
Hendor is ahead of new EU electric motor regulations
Hendor decided to transition its 0,12 .. 0,55 kW electric motors directly to IE3, surpassing the legal minimum of IE2.
Our manufacturing process explained: Assembly & Testing
How do our pumps & filters go from PP to an end product? Step 5: assembly and testing.
Our manufacturing process explained: wet paint coating
How do our pumps & filters arise from PP to an end product? Step 4: wet paint coating the electric motor.
Our manufacturing process explained: plastic welding
How do our pumps & filters arise from PP to an end product? Step 3: plastic welding.
Our manufacturing process explained: mechanical machining
How do our pumps & filters arise from polypropylene (PP) to an end product? Step 2: mechanical machining.
From polypropylene to Hendor end product
How do our pumps & filters arise from polypropylene (PP) to an end product? Step 1: injection molding.
Kees Stigter joins Hendor as our new Sales Director
We welcome a new member to the Hendor team: Kees Stigter. He takes the role of Sales Director, and will be responsible for our global product sales.
The Hendor standard: safe & easy installation and maintenance
When you buy new chemical pumps, you have to take into account the piping. We deliver all our pumps with pre-fabricated three-piece unions.
Hendor DM-series: best of both worlds
Due to the frequent use of different precious metal finishes from various electrolytes, a standard centrifugal pump is not always appropriate.
Hendor celebrates 25 years of presence in North America
This year marks the 25th anniversary of Hendor-PE Inc.. We proudly look back at the way our partners have carried out the Hendor legacy overseas.
Hendor customization: this is how we do it
With decades of experience in designing pumps and filters, our engineering department creates customized specialties tailored to your demands.
D13: less energy, more power
Sustainability means a long product lifetime, but also the reduction of emission. We redeveloped our D110 series and replaced it with our D13 series.
Hendor SHX: stainless steel is the new thermoplastic
The market is in need of pumps and filters which are capable of high performance. Therefore, we developed the SHX series, made out of stainless steel.
Hendor improves the powder coating pre-treatment process
We developed filter technology that keeps the quality of the degreasing fluid constant & clean. The filter remains active longer & captures more dirt.
Hendor presents new robust Basket Strainer
In order to protect both magnetic drive and mechanical seal pumps, we want to introduce our new basket strainer.